Internet speed test

Measure download, upload, ping and jitter with OpenSpeedTest. Start the test below to check this browser’s connection.

Run a speed test

Press Start in the test below to measure download, upload, ping and jitter. Testing uses data and may affect other activity on your connection.

Prepare a useful comparison

  • Keep the device and connection consistent; note whether a VPN is enabled.
  • Pause competing traffic if you want a quiet baseline. Testing transfers real data and can consume substantial bandwidth.
  • Start in the OpenSpeedTest panel and read its results there. If the panel is blocked, open the provider link below.

Provided by OpenSpeedTest.com

Test not loading? Open in a new tab

Where your speed result comes from

  1. Prepare a comparison

    Keep the same device and pause competing traffic if appropriate.

  2. Start inside the panel

    Choose the embedded Start control when ready for real data transfers.

  3. Transfer test traffic

    Your browser exchanges download and upload data with the provider.

  4. Read the provider results

    Compare throughput and responsiveness with the test conditions.

OpenSpeedTest runs the measurement and presents its results inside the embedded panel. The surrounding page does not read its cross-origin numbers.
On this page

Learn more about Internet speed test

Run an internet speed test with OpenSpeedTest

This internet speed test uses the official OpenSpeedTest widget to measure download speed, upload speed, ping and jitter from your browser. The measurement interface and servers are operated by OpenSpeedTest. Results appear inside the panel above, so you can check your connection without leaving this page or installing a browser extension.

Read more

To begin a bandwidth test, wait for the panel to load and press its Start control. We do not enable automatic testing. Loading the panel contacts the provider to display its interface, but you choose when to begin the bandwidth measurement. If the panel cannot load, use Open in a new tab to visit the same provider directly.

Before starting, pause large downloads and cloud backups if you want a quiet baseline. Keep the same device, browser and connection when comparing runs. If normal household activity is what you want to investigate, leave it running and record that context alongside your result. Run only one measurement at a time.

Data use during an internet speed test

A bandwidth test transfers real data in both directions. It can consume substantial bandwidth, particularly on a fast connection, and may compete with video calls or other downloads. The hosted widget controls its own transfer sizes and timing. This page does not offer a fixed data allowance or a data-saver mode.

Read your internet speed test results

Download in the bandwidth test describes how quickly test data reaches your browser from the measurement server. It helps investigate slow downloads, streaming interruptions and other incoming transfers. A larger number indicates faster delivery on that tested path, but another website or file server can have different capacity and routing.

Read more

Upload in the bandwidth test describes data sent from your browser to the measurement service. Cloud backups, video calls, live broadcasts and large attachments all use outgoing capacity. A slow upload result can justify investigating competing traffic or wireless conditions, but it does not identify a particular faulty router, cable or internet provider.

The test displays throughput in megabits per second, or Mbps. Eight bits make one byte: 80 Mbps corresponds to a theoretical 10 megabytes per second before other overhead and application behavior. File download programs may display bytes rather than bits, so check the units before comparing apparently different numbers.

Ping and jitter in an internet speed test

Ping describes the responsiveness of the tested connection; jitter describes variation in latency. Lower and more consistent values generally support responsive interactions. Read the labels and units inside the provider’s panel. These browser-based measurements are not a direct measurement of the latency reported by a particular game or video-call application.

If a bandwidth test fails or leaves a value unavailable, do not treat that absence as zero speed or zero jitter. A blocked provider domain, interrupted connection, restrictive browser extension or temporary service problem can prevent a measurement. Check whether ordinary websites still load before concluding that the whole connection is offline.

What this internet speed test can establish

This bandwidth test measures the route from this browser to the servers used by OpenSpeedTest. Wi-Fi, device performance, VPN routing, background traffic and the selected measurement destination can all influence the result. It does not independently verify your purchased subscription speed, access technology or the maximum capacity of every part of your connection.

Read more

The test interface, server selection and result calculations are maintained by OpenSpeedTest. This site embeds the official hosted application and does not recalculate its readings. Changes made by the provider can therefore change the panel independently of this site. Our previous Cloudflare-specific calculation method, sample table and transfer limits do not apply to this integration.

A single bandwidth test cannot isolate whether a bottleneck is in Wi-Fi, your router, an upstream link or the destination service. Change one condition at a time and repeat only as needed. A wired comparison or a quieter time of day often provides more useful evidence than repeatedly chasing the largest number.

Internet speed test questions and practical checks

Can an internet speed test help compare Wi-Fi?

Run the internet speed test close to the router and then in the room where problems occur, using the same device. Walls, interference and shared airtime can change wireless performance. Repeat each situation at comparable moments. A consistent difference supports further Wi-Fi investigation, while an isolated result may reflect unrelated traffic.

If performance improves on a wired connection, that comparison helps distinguish the wireless segment from the rest of the route. Check negotiated link speed, cable condition and router settings alongside the measurements. Keep a short note about each setup so that another person can reproduce the comparison without guessing where or how it was made.

Should an internet speed test run through a VPN?

The internet speed test follows the route used by this browser, including a VPN or proxy when applicable. Compare enabled and disabled states only when appropriate for your situation. Record both states clearly. The test does not change your VPN configuration, choose a tunnel location or inspect traffic from other applications.

A faster result through a VPN can reflect changed routing, while a slower one can reflect added distance or congestion. Neither finding establishes whether privacy protection is working. Use IP comparison to examine public addresses and the WebRTC check for the separate evidence that it collects.

IP comparison

WebRTC check

Does this measure packet loss or a game server?

The embedded internet speed test does not provide evidence of UDP packet loss or a measurement to your chosen game server. A game may use a different destination and protocol. For route investigation, Ping and traceroute provide separate observations from named remote probes; their source and direction differ from this browser-based test.

Ping

traceroute

What happens to my result?

Loading this bandwidth test connects your browser to OpenSpeedTest and its supporting services. Running it sends measurement traffic to its servers, which receive your public address and ordinary request information. Results are displayed within the provider’s application. This integration does not copy them into a site account or offer our previous downloadable sample report.

The internet speed test is a third-party service, so this site cannot promise that the provider retains no operational records. Review OpenSpeedTest’s policies and official embedding documentation before using the service if its handling of requests matters to your situation. Our privacy policy, methodology and data sources describe this integration’s scope.

official embedding documentation

privacy policy

methodology

data sources

Whose servers provide the bandwidth measurement?

The embedded measurement interface and servers are operated by OpenSpeedTest. The result concerns your browser’s path to that provider under the current conditions. It does not directly measure every website, your router’s advertised link rate or a particular application server.

Does the bandwidth test begin automatically?

No. Loading the provider’s interface can contact its service, but you choose when to start the measurement. Review current downloads, backups and other shared traffic first, because those conditions affect how you interpret the result.

Does a single low result prove my ISP is at fault?

No. Wi-Fi conditions, device workload, shared traffic, a VPN and the path to the measurement server can all affect observations. Repeat under documented conditions and compare a suitable wired connection before assigning a cause.

What if the measurement panel does not load?

An extension, provider outage or network restriction can prevent the embedded interface from loading. The available external link opens the same provider separately. An unavailable widget is not a measurement of zero connection speed.